PES Chem 561 Thermal Barrier
PES Chem 561 Thermal Barrier is a two pack solvent free epoxy coating, which you can apply by brush or standard airless spray. Also, depending on the surface temperature, you can apply it in 3 or 4 coats.
Once cured, the material can reduce surfaces temperatures by 60% and heat loss by 40%.
Specs
Specs of this liquid applied insulation coating include the following:
- Two pack solvent free
- Epoxy based material
- High build coating
- Suitable for application to mechanically prepared surfaces
- High temperature resistance (392°F)
- Independent tested to ISO 8301
- Easy to use and apply
- Protect facility staff from burns
- Reduces heat loss on bare steel pipes
- Eradicates the use of caging on pipes and process equipment
- Proven to reduce surface temperatures from 356°F to below 140°F
Example of this Liquid Applied Insulation Coating
An evaporator at a UK based chemical company required a coating to help reduce heat loss and the surface temperature. The surface temperature was measured at 203°F. In addition, the substrate was mechanically abraded using handheld grinders. Then, the use of 107 Metal Repair Paste XL filled any corrosion pitting. Once cured, the first coat of 561 Thermal Barrier was applied at 4-8 mils WFT. It was then allowed to cure for 2 hours. Once dry, a 2nd coat was applied at 408 mils. The following coats were applied at 0.4 in. each to give a total DFT of .15 in. The surface temperature was measured at 185°F-235°F once the application has been completed, a 60% reduction in surface temperature.
The following is an example of this liquid applied insulation coating:
Contact us with the link below to purchase your PES Chem 561 Thermal Barrier today!