PES 201-A-PL: Ceramic Repair Paste
PES 201 Ceramic Repair Paste is a two component solvent free epoxy metal repair compound. The product has been designed for use on a wide range of metallic surfaces subject to abrasion and impact. The product is suitable for emergency repairs or part of planned maintenance to equipment such as worn impellers, damaged valves, eroded separator housings, damaged pump casings, eroded pipe work, propellers, bow thrusters, rudders, corroded water boxes and eroded end plates and tube sheets.
Main Characteristics
- Two component
- Solvent Free Epoxy
- 3:1 Mixing Ratio by Volume
- Usable life: 25 Minutes @68°F (20°C)
- Touch Dry 90 Minutes @68°F (20°C)
- Full Cure 3 Days @68°F (20°)
- 100 Rockwell R Hardness (Once Fully Cured)
- Applied by Spatula or Applicator Tool
- Available in 1kg, 2kg, 3kg, 30kg pack sizes
Mechanical Properties
Adhesion
- Tensile Shear to ASTM D1002 2675psi (288kg/cm²)
Compressive Strength
- Tested to ASTM D 695 15,500p (1089kg/cm²)
Corrosion Resistance
- Tested ASTM B117 Minimum 5000 Hours
Flexural Strength
- Tested to ASTM D790 10,000psi (703kg/cm²)
Heat Resistance
- Suitable for water immersion up to 158ºF (70ºC) and intermittent contact with steam up to 248ºF (120ºC). Dry heat resistance up to 302ºF (150ºC).
This entry was posted in
Epoxy Coatings,
PES,
PES 200 Series and tagged
Bryan,
Ceramic,
College Station,
Corrosion Resistance,
Data Sheet,
Epoxy Paste,
Heat Resistance,
PES 201,
Surface Coating,
Surface Repair,
Texas. Bookmark the
permalink.
