-
Recent Posts
Recent Comments
- LeeRoy Cauvel on 101 Power Metal Repair Paste
- LeeRoy Cauvel on PES 181 Technical Data Sheet
- Microcare on Pump Impeller Cavitation: Major Causes and Prevention
- Karen Miller on PES 181 Technical Data Sheet
- Fayaz on 101 Power Metal Repair Paste
Archives
- January 2024
- December 2023
- October 2022
- September 2022
- July 2022
- May 2022
- April 2022
- October 2021
- August 2021
- July 2021
- June 2021
- January 2021
- December 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- June 2019
- May 2018
- March 2018
- January 2018
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- September 2014
- August 2014
- July 2014
- June 2014
Categories
- Anti-Slip Products
- Ball Mill
- Ceramic Enhanced Products
- Ceramic Wear Brick
- Cooling Towers
- Data Sheets
- Epoxy Coatings
- Expansion Joints
- Fluid Gas Desulfurization Systems
- Heat Exchangers
- Holz Rubber
- Industrial Coatings
- Nondestructive Testing Services
- PES
- PES Series
- Product Comparison
- Reinforcement Products
- Repairs
- Secondary Containment
- Steam Condensers
- Uncategorized
Meta
Chiller Repairs: DON’T REPLACE IT – REPAIR IT!
In May of this year an HVAC customer of ours contacted us to look at a chiller that belonged to a brick & mortar customer of theirs. This chiller had developed a corrosion-caused hole in the bottom of the chill water barrel. These barrels are often painted at the factory with alkyd enamel primers without the molecular strength to act as an Under Insulation Corrosion Resistant Coating. The chilled water in these vessels are cooled down to temperatures in the low 40’s. Then, they are sent to a machine called an air handler. The air handler is where the chill water controls temperatures in large buildings of all types. The Evaporator – Cooler part of these chillers are insulated to protect the cold water being made from the warmer temperatures surrounding the machine. When the warm moist air finds its way to direct contact with the steel chiller barrel, condensation occurs. This is the perfect environment for the spreading of corrosion. The following is one of many chiller repairs PES has done.
Posted in Chillers, Cooling Towers
Tagged Chiller Repair, Chillers, HVAC cooling equipment
Leave a comment
PES 180 Technical Data Sheet
PES 180 is a two-component paste used as a high strength structural adhesive. The system is based on toughened epoxy novolac resins, silicon steel alloy, and fillers for chemical and corrosion resistance.PES-CHEM 511 UCEN for Concrete Surfaces
PES-CHEM 511 UCEN is a two component solvent free epoxy novolac coating capable of withstanding immersion and contact with high concentration industrial chemicals.
Our team at PES uses PES-CHEM 511 UCEN to apply chemical resistant anti-slip finish for concrete surfaces and industrial floors. The following is one example where this product was a success for one of our clients.
Posted in Epoxy Coatings
Tagged Application, Concrete Surfaces, PES 511, PES-Chem 511 UCEN
Leave a comment
PES-CHEM 511 UCEN Product Specifications
PES-Chem 511 UCEN is a high build solvent-free epoxy novalac coating designed to provide outstanding chemical and corrosion protection of steel and concrete structures. The coating is particularly resistant to attack by strong acids including 98% sulphuric acid.
Posted in Epoxy Coatings
Tagged Application, PES 511, PES-Chem 511 UCEN, Technical Data Sheet
Leave a comment
PES-CHEM 511 UCEN Technical Data Sheet
PES-CHEM 511 UCEN is a high build solvent-free epoxy novolac coating designed to provide outstanding chemical and corrosion protection of steel and concrete structures. The coating is particularly resistant to attack by strong acids including 98% sulfuric acid.
Posted in Epoxy Coatings, Industrial Coatings, PES, PES 500 Series Final, PES Series, Repairs
Tagged Anti-Slip Coatings, Anti-Slip Floor Coating, Anti-Slip Products, Application, Chemical Resistant Coating, Corrosion Repair, Corrosion Resistance, PES 511, PES Solutions, PES-Chem 511 UCEN, Technical Data Sheet
Leave a comment
PES Product Success Stories
With years of experience providing Polymeric Engineered Solutions, our team is committed to resolving deterioration and corrosion using our PES products. The following are just a few of the many solutions our PES products have provided.Power Metal and Ceramic Repairs with Plant Equipment & Services
Learn more about our power metal and ceramic repairs and services.